Testing Tools
Tools for checking, testing & Measureing all sorts of things.
Phonic PAA3
Handheld Audio Analyzer
Right alongside a flashlight and duct tape, no serious audio engineer should go anywhere without the Phonic PAA3 in their back pocket. This handheld audio analyzer is resoundingly accurate and features an array of different tools, including a 31-band real-time spectrum analyzer, reverb time analyzer, sound pressure and line level meter, internal signal generator, EQ setting calculations, microphone calibration, and speaker phase checking abilities. All functions and menus are controlled through central jog dials, so your other hand is free to adjust audio settings. A built-in USB interface allows for easy data upload and download, as well as the option of real-time PC operation. A large LCD backlit display provides visibility in any environment, and 4 AA batteries provide 7 hours worth of power – assuring the PAA3 is always ready when you need it.
Features:
31-band Real Time Spectrum Analyzer
RT60 reverb time measurement
SPL meter from 30 dB to 130 dB
Built-in calibrated measurement microphone
Phase check function
31-band EQ setting value display (Boost/Cut)
4 standard response times available
3 power modes: (1) Power Save (2) Manual off (3) Off
Audio test signals and desktop control software included
Line signal measurement display in dBu, dBV, or Volts (AC)
3 level range selection for dB SPL and line signal
SPL meter calibration through standard 94dB sound level calibrator
Maximum level display Peak hold display
Adapter operation available
7 hours of continuous operation with four AA batteries
Memory and average calculation function
XLR input for line measurements and output sockets for signal
generator output
Signal generator with pink noise, 1 kHz and polarity test signal
PAA-3 Handheld Audio Analizer+USB 2.0 Interface $780.00 inc GST
Phonic PAA6 Professional Audio Assistant
Handheld, Dual Channel, Precision Audio Analizer with 61 band Real-time Spectrum Analysis, Built-in Condenser Measurement Mics.
Essential tools, such as the Phonic PAA6 Professional Audio Assistant generally wind up at the bottom of pro audio wishlists after esoteric preamps, compressors, and EQs. But more often than not, the key to great sound lies in the utilitarian gear, particularly, the Phonic PAA6 audio analyzer. If you want to get the most out of your studio equipment or PA system, the PAA6 should be at the top of your bucket list. A highly accurate measurement tool, the elegant touch screen interface of the PAA6 offers unfettered access to 61-band real-time spectrum analysis; Fast Fourier Transform (FFT); sound pressure (SPL) and dBu/dBV line voltage measurement; EQ setting; phase and polarity check; LEQ (equivalent continuous noise level); audio oscilloscope; and RT-60 functions. The PAA6 also has two built-in condenser measurement mics that can be used in six different positions. If sound is your product or passion, the Phonic PAA6 is perhaps the wisest investment you can make for your studio or sound reproduction system. Whether you're setting up monitors, treating room characteristics, calibrating listening levels, or want to know the harmonic distortion and noise characteristics of your workhorse preamps to ensure clean mixes, the Phonic PAA6 is your key to the best possible quality sound.
Features:
Powerful dual-channel, palm-size audio analyzer
Elegant graphical user interface
Functions include RTA, LEQ, RT-60, FFT, THD+N, Polarity, Phase, Scope and Meter (dB SPL, dBu, dBV & Volt)
Long-lasting rechargeable lithium-ion battery system
Tone generator includes pink noise, white noise, sine wave, sweep, polarity, triangle, and square
30dB - 130dB SPL meter
PAA-6 2-CH Audio Analizer W/Colour Touch LCD Screen $1,899.00 inc GST
Redback Digital Audio Impedance Meter
Tests 100volt and 70Volt Line Speaker Systems
An absolute necessity for all PA system installers. This impedance meter for ‘dummies’ designed and manufactured by Altronics calculates and displays speaker loads in watts. Most impedance meters on the market display the impedance in ohms, leaving the installer to calculate the system wattage. Measures and calculates loads for both 100V and 70V line systems up to 10k Watts in power. Power is supplied from a 9V battery which can be recharged via the inbuilt charging socket. This is suitable for connection to a plugpack or car accessory socket. All housed in a compact durable handheld case. 117H x 79W x 33D mm.
Features:
Suits 70V and 100V up to 10k Watts
Calculates load in ohms and watts
9V battery powered with recharging port
Compact handheld case
Includes test leads
Backlit LCD Display
Redback Q2003 Impedance Meter $236.00 inc GST
Redback Audio/Video Cable Tester
13 way tester. Compatible with 6.35mm jack, 3/5/7/8 pin DIN, RCA, 3/5 pin XLR, 4P and 8P Speakon, Banana plugs, RJ45 and USB. A quick and easy way to confirm lead integrity. Constructed from a steel case it is built to withstand the rigours of professional use. Equally suited to AV & CCTV installers. An invaluable tool for checking leads in an instant. Requires 9V battery.
Redback Q2022 13way Cable Tester $70.00 inc GST
Professional Cable Tracer and Network Cable Tester
Combines the functionality of a cable tracer and network cable tester in one convenient unit. The main unit can be connected to an unidentified pair which injects an audible signal down the line. The “tracer” unit may then be used at the other end of the cable run to identify the correct conductors. In addition, patch leads & field wiring may be plugged inline between the units to provide instant verification of continuity and correct wiring sequence. Probe includes an LED light for easy cable identification when in dark areas. Suits RJ45 and RJ11 leads. Requires 3 x AA and 1 x 9V batteries.
Features:
Headphone socket (earphones included)
Adjustable buzzer volume
Tests network and phone circuit voltage
LED light on probe
Single or dual tone
Verifies short, open or crossed pairs in UTP cables
Confirms integrity of patch leads and field wiring
Includes RJ45 lead & croc clip test lead
Q1341 Professional Cable Tracer and Network Cable Tester $100.00 inc GST
Pocket Sound Preasure Level dB Meter (SPL)
Compact pocket sized SPL meter for general purpose sound level measurement. The wide 40 to 130dB range is ideal for occupational health and safety testing in venues, industrial environments, car audio and home theatres. Fast response time with min/max function. LCD backlight switches on automatically when working in dark areas. Includes threaded insert on rear for tripod mounting. Auto power off.
Features:
Ranges: 40-130dB
Resolution: ±0.1dB
Freq. range: 31.5Hz - 8000Hz
Freq. weighting: A
Accuracy: ±3.5dB
Microphone: Electret condenser
Battery: 9V (included)
Dimensions: 130H x 52W x 32D mm
Q1266 Pocket Sound Pressure Level dB Meter $44.00 inc GST
Q1054 Soft Carry Case $6.00 inc GST
Pro Sound Preasure Level dB Meter (SPL)
A must for the serious audio installer or enthusiast. This quality sound pressure level meter gives a digital readout of the ambient noise level at its microphone. Features two ranges: Low (30 to 80dB) and High (80 to 130dB), with two built-in weighting curves. A and C weighting. Response can be switched between slow (1s) or fast (125ms). Features a max hold switch, which displays the highest reading attained. Supplied with protective carry case, tripod mounting adaptor and mic wind screen. Requires 1 x 9V long life battery (included).
Features:
Ranges: Lo: 30 - 80dB
Hi: 80 - 130dB
Resolution: ±0.1dB
Freq. range: 31.5Hz - 8000Hz
Dynamic range: 50dB
Freq. weighting: A & C
Accuracy: ±1.4dB
Microphone: Electret condenser
Dimensions: 252H x 66W x 33D mm
Q1264A Sound Pressure Level dB Meter $165.00 inc GST
Combination Digital Multi Meter & LAN Cable Tester
There are lots of multi-meters out there, but this is my pick for features and price.
Includes all the features of a standard digital multimeter with the addition of a LAN tester. This is the perfect ‘all-in-one’ solution for network installers & IT technicians. The multimeter is an auto ranging design measuring current, voltage & resistance. Includes a max reading recall function, plus data hold. The LAN tester features dual RJ45 sockets on top for quick testing of ethernet patch leads. A remote terminator permits testing of installed cables in buildings & patch panels. The LAN tester quickly confirms the integrity of each conductor by way of the LED indicators. Suitable for both RJ45/RJ11 & BNC coaxial cabling (adaptor leads included). Supplied with rubber holster, carry case, network adaptors and high quality silicon rubber test probes.
Features:
Autoranging multimeter
Will test 10Base-T, 10Base-2, RJ45/11, 258A, TIA 568A/568B and Token Ring
Includes RJ & BNC network lead adaptors
Auto power off
Supplied with test probe leads & carry case
Battery included
Cat II 1000V & Cat III 600V
D3020 Combination DMM & LAN Cable Tester $85.00 inc GST